Tämän tuotteen voi ostaa vain 1 kpl:n erissä
Tuotetiedot:
- Keskireikä:20 mm
- Sylinterin tilavuus:45.6
- Virtalähde:Bensiini 2-tahti
- Teho:2.2
- Kaasun käyttö:Etusormella
- Äänenvoimakkuus:115
- Äänenpainetaso:100
- Mukana tuleva leikkuulaite:Raivausterä
- Vakiovaljaat:Advance X-Treem
- Paino:11.451 kg
- Tärinä, vasen:2.2
- Tärinä, oikea:2.4
- Tuotenumero: 1000854248
- Valmistajan numero: 41472000628
- Tuotemerkki: Stihl
- Tuoteryhmä: Raivaussahat
Tuotekuvaus
Supplied with harness and saw blade.
Professional logger
This machine has an optimized inclination of the bevel gear (25°), which makes it particularly suitable for felling and forest clearing, while significantly increasing working comfort.One-grip controls
All the engine's operating modes are located together in one and the same handle. The work becomes simple and convenient while increasing safety.Starter control (M-Tronic)
With M-Tronic, you don't have to think about whether the machine is cold or hot when starting, there is only one start position on the start control. The exact right amount of fuel is automatically pumped forward. You don't have to think about anything at start-up, the system takes care of everything.Spring-loaded start/stop button
With the spring-loaded start/stop button, the machine always automatically returns to the start position and is always ready to start.
X-TREEm carrying system
Clearing harness specially developed for long work shifts in the forest with a saw blade or clearing grass.
Interlock system
Because the locking pin can be locked in one position and does not have to be held, changing cutting tools is very easy.
Compensator
STIHL compensator, a control system in the carburettor, which ensures that the fuel-air mixture is always optimal in relation to how dirty the filter is. The compensator provides optimal effect with low emissions. Only when 80% of the filter surface is occupied is it time to clean the filter.
Air filter with long operating time
Easily accessible pleated paper filter with large combined filter surface provides very long cleaning intervals.
Primer
With the manual fuel pump, gasoline is pumped into the carburetor with a few simple thumb presses. You no longer have to pull the starter rope to get petrol to the carburettor.
2-MIX engine
Stihl's two-stroke engine with 2-MIX technology provides high power, good traction and saves up to 20% fuel compared to equivalent STIHL two-stroke engines without 2-MIX technology. The emissions of harmful substances are also greatly reduced by up to 70% and the engine meets the requirements according to EU II without any problems.
4-point anti-vibration system
On the new generation of STIHL clearing saws, there are built-in steel springs as anti-vibration elements. These steel springs absorb and reduce the oscillations that occur in the motor and the rotating cutting tool.
Easy2Start (E)
A spiral spring between the pulley and the crankshaft stores the energy and compensates the power peaks from the starting pull. Result: you only need half as much force to start the machine and the speed of the actual starting pressure can be reduced by as much as two thirds.
M-Tronic
Fully electronic ignition point control and fuel metering. The STIHL M-Tronic (M) engine management system provides optimal engine power, constant top speed and very good acceleration in all modes. In addition, the system has a memory function, which further improves driving characteristics. Manual carburetor adjustment is a thing of the past.
Large fuel tank
The transparent fuel tank holds a full 0.75 l (FS 240 - 460) or 0.99 l (FS 490/560), which provides long work sessions without any disturbing tank stops. The fuel level is easy to check because the tank is transparent, which also eliminates unnecessary stops.
Rule
A handlebar facilitates work and improves ergonomics and is the natural first choice when working over larger surfaces. With a handlebar, you can work calmly and methodically in large oscillating movements, from side to side. The handlebars can also be adjusted according to your needs.
Tool-free adjustment of the handlebars
The handlebar is individually adjustable via a single knob, completely without tools. It can also be folded down completely against the rigging pipe in the so-called transport mode.
Winter mode
Very simple system where the machine can be quickly switched from summer to winter mode. During the cold season, icing of the carburettor and air filter is thus prevented.